Pillar Mounted Jib Cranes, also commonly referred to as Column Mounted Jib Cranes, assist the staff and multiply human efforts, handling loads up to 10 tonnes precisely and effortlessly. These Jib Cranes are useful, especially for loading or unloading workpieces on machine tools. These are also useful for loading and unloading trucks. These cranes can also become an integral part of a standalone workstation and machine assembling area.
Factors to consider while selecting Jib Crane:

• Capacity
• Height Under Hook (HUH)
• Overall Height
• Working Span
• Boom Rotation
• Electric Motion Requirement
• Weatherization
• Installation

Available JIB Crane Types:
The Pillar Mounted JIB Cranes come in 3 different variants based on the support for the Jib arm.

• Bottom Strutted Cantilever Type:
  Our Pillar Mounted Cantilever Series cranes offer the highest amount of clearance, both under and above the boom. In the case of the top height restriction, this design provides the maximum hook path.
• Top Strutted Tie-Rod Supported Type:
  This design is the most economical as the structure becomes lighter due to the support at the other end of the JIB arm. It has no support structure under the boom, so the trolley hoists can travel virtually the full length of the boom.
• No Strutted Support Type:
  This design has only the jib arm and has no additional support, i.e., neither on the bottom side nor on the top side. This design is applicable only to low capacities and low arm lengths.

Features:

• Crane Rotation: Upto 360°
• Capacities: up to 10 tons
• Spans: up to 10 Mtr
• Heights—floor to underside of boom: up to 12 Mtr